Filter
Top Products
Using the devices
24
Selecting a standard display
EM 100
SK 100 and SKM 100
To select a standard display:
̈ Press the UP/DOWN button to select a standard display:
Contents of the display Selectable standard display
“Receiver Parameters”
appears after switch-on of the receiver and displays the
receiver parameters (see page 5).
“Soundcheck” (display with additional function)
displays the signal quality within the transmission area.
“Guitar Tuner” (display with additional function)
displays the guitar tuner.*
* The “Guitar Tuner” standard display is deactivated upon delivery. To show this standard
display, you have to activate it (see page 26).
Information on the soundcheck function and the guitar tuner function can be found
in the instruction manual of the EM 100 receiver available on the ew G3 product
page at www.sennheiser.com.
SK 100 SKM 100
Press the rocker button Move the multi-function switch
Contents of the display Selectable standard display
“Frequency/Name”
“Channel/Frequency”
“Channel/Name”
543.200
ew100 G3
1. 1
PEAK
MUTE
P
-10
0
40
25
10
-20
-30
AF
RF
MHz
543.200 MHz
Soundcheck
MUTE
PEAK
-10
0
-20
-30
AF
40
25
10
RF
440 Hz
MUTE
PEAK
-10
0
40
25
10
-20
-30
AF
RF
ew100 G3
MHz
543.200
MUTE
P
AF
MHz
543.200
B.Ch: 20.24
MUTE
P
AF
B.Ch: 20.24
MUTE
P
AF
ew100 G3