Sennheiser 100 G3 Microphone User Manual


 
Specifications
32
In compliance with (EM)
Approved by
In compliance with
Certified by cCSAus KL, 60065, CSA.
SK 100 and SKM 100
Europe:
USA:
EMC EN 301489-1/-9
Radio EN 300422-1/-2
Safety EN 60065
47 CFR 15 subpart B
Canada: Industry Canada RSS 210, IC: 2099A-G3EM100
Mains unit*
* depending on country variant
NT 2–1 NT 2–3
Input voltage 110 V~ or 230 V~,
50/60 Hz
100 to 240 V~,
50/60 Hz
Power/current consumption 9 VA max. 120 mA
Output voltage 13 V 12 V
Secondary output current 300 mA 400 mA
Temperature range –10 °C to +40 °C –10 °C to +40 °C
Europe:
EMC NT 2-3: EN 55022, EN 55024,
EN 55014-1/-2
NT 2-1: EN 55013, EN 55020,
EN 55014-1/-2
Safety EN 60065
USA:
47 CFR 15 subpart B
Canada: ICES 003
For accessories and information on connector assignment, visit the ew G3 product page at www.sennheiser.com.
RF characteristics
Modulation wideband FM
Frequency ranges 516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A to E, G, see page 4)
Transmission frequencies 1,680 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 12 factory-
preset channels, intermodulation-free
1 frequency bank with up to 12 user programmable
channels
Switching bandwidth 42 MHz
Nominal/peak deviation ±24 kHz / ±48 kHz
Frequency stability ±15 ppm
RF output power at 50 Ω typ. 30 mW
Pilot tone squelch can be switched off