Filter
Top Products
Overview of the operating menus
25
Overview of the operating menus
EM 100
When one of the standard displays is shown on the display panel, you can get into the main
menu by pressing the SET button ¿. The extended menu “Advanced Menu” and the
submenu “Easy Setup” can be accessed via the corresponding menu items.
For more detailed information on the operating menus, refer to the individual
instruction manuals of the devices. These instruction manuals can be down-
loaded from the respective product pages at www.sennheiser.com.
Squelch
Easy Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Main menu
“Menu“
Reset List
Current List
Scan New List
Exit
“Easy Setup“
Tune
Guitar Tuner
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
Extended menu
“Advanced Menu“
Display Function of the menu item
Main menu “Menu”
Squelch Adjusts the squelch threshold
Adjustment range: adjustable in three steps “Low”, “Middle”, “High”
Special function (for servicing purposes only): With the squelch threshold set to “Low” ,
you switch the squelch off by keeping the DOWN ´ pressed. If you then press the UP
button ´, you switch the squelch on again.
CAUTION!
Danger of hearing damage and material damage!
If you switch the squelch off or adjust the squelch threshold to a
very low value, loud hissing noise can occur in the receiver.
The hissing noise can be loud enough to cause hearing damage
or overload the loudspeakers of your system!
̈ Always make sure that the squelch is switched on (see above).
̈ Before adjusting the squelch threshold, set the volume of
the audio output level to the minimum.
̈ Never change the squelch threshold during a live trans-
mission.