Filter
Top Products
Using the devices
22
Muting the audio signal or deactivating the RF signal
EM 100
To mute the audio signal:
To unmute the audio signal:
SK 100
The MUTE switch · allows you to mute the audio signal or to deactivate the RF signal. Via the
“Mute Mode” menu item, you can set the desired function of the MUTE switch ·:
̈ From the “Mute Mode” menu item, select the desired setting (see page 27).
̈ Exit the operating menu.
̈ Slide the MUTE switch · to the left, to the position MUTE.
The bodypack transmitter reacts as indicated in the table.
̈ When one of the standard displays is shown on the display panel, press the
STANDBY button.
“RX Mute On?” appears on the display panel.
̈ Press the SET button.
The audio signal is muted.
̈ Press the STANDBY button.
“RX Mute Off?” appears on the display panel.
̈ Press the SET button.
The muting is canceled.
Setting Slide the MUTE switch · ... Function
“Disabled” ... to the left (position MUTE) None
“RF On/Off” ... to the left (position MUTE) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“AF On/Off” ... to the left (position MUTE) Mutes the audio signal
... to the right Unmutes the audio signal
SET
SET
·
MHz
543.200
ew100 G3
MUTE
P
AF
ብ
ቨ