Filter
Top Products
Using the devices
18
To completely switch the receiver off:
̈ Disconnect the receiver from the mains by unplugging the mains unit from the wall
socket.
SK 100 bodypack transmitter
To switch the bodypack transmitter on (online operation):
̈ Push the two catches ¸ and open the battery compartment cover µ.
To switch the bodypack transmitter off:
̈ If necessary, deactivate the lock mode (see page 21).
To switch the bodypack transmitter on and to deactivate the RF signal on switch-on (offline
operation):
̈ Briefly press the ON/OFF button Ƹ.
The bodypack transmitter transmits an RF signal. The transmission icon ብ is
displayed.
The red ON LED ¿ lights up and the standard display “Frequency/Name” appears
on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch-on.
For more information, see below.
̈ Press the ON/OFF button Ƹ until “OFF” appears on the display panel. The red
ON LED ¿ goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button Ƹ will cancel your entry
(ESC function) and return you to the current standard display.
̈ Press the ON/OFF button Ƹ until “RF Mute On?” appears on the display panel.
̈ Press the SET button ¶.
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon ብ is not displayed.
µ
Ƹ
¿
¸
¸
ብ
ON/OFF
ON/OFF
ON/OFF
SET