Filter
Top Products
17
MZ-R909
Example1: When the > key on the set is pressed:
Example2: When the N > key on the remote commander
is pressed:
4. When all the keys on the set and on the remote commander are
considered as OK, the following displays are shown for 4 sec-
onds.
Example1: When the keys on the set are considered as OK:
Example2: When the keys on the remote commander are con-
sidered as OK:
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
000 FF **
Remote commander LCD display
**
: AD value of the remote commander key (hexadecimal
00 to FF)
000 rPLAY **
Remote commander LCD display
**
: AD value of the remote commander key (hexadecimal
00 to FF)
888 SET OK **
Remote commander LCD display
**
: AD value of the remote commander key (hexadecimal
00 to FF)
888 RMC OK **
Remote commander LCD display
**
: AD value of the remote commander key (hexadecimal
00 to FF)