Filter
Top Products
30
MZ-R909
6. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
B6.
7. Press the X key.
(1028 is blinking)
8. Press the [VOL+] key once to change the blinking portion to
1029.
9. Press the x key.
(00 is blinking)
10. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
95.
11. Press the X key.
(1029 is blinking)
12. Press the [VOL+] key once to change the blinking portion to
102A.
13. Press the
x key.
(00 is blinking)
14. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
02.
15. Press the X key.
(102A is blinking)
16. Press the [VOL+] key twice to change the blinking portion to
102C.
17. Press the x key.
(00 is blinking)
18. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
02.
19. Press the X key.
(102C is blinking)
20. Press the
[VOL+] key once to change the blinking portion to
102D.
21. Press the x key.
(00 is blinking)
22. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
D0.
23. Press the X key.
(102D is blinking)
24. Press the [VOL+] key twice to change the blinking portion to
102F.
25. Press the x key.
(00 is blinking)
26. Adjust with the [VOL+] key (adjusted value up) or [VOL--]
key (adjusted value down) so that the adjusted value becomes
DF.
27. Press the
X key.
(102F is blinking)
28. Press the [VOL+] key to change the blinking portion to 1048,
and press the [DISPLAY] key on the remote commander for
several seconds (about 3 seconds) to exit the patch data write
mode and display as below.
29. Press the [VOL+] key to display as below.
30. Press the [DISPLAY] key on the remote commander for sev-
eral seconds (about 3 seconds) to activate the patch data write
mode.
(The following display will appear where 00 is blinking)
023 102995
Remote commander LCD display
95
: Adjusted value
023 102A00
Remote commander LCD display
00
: Adjusted value
023 102A02
Remote commander LCD display
02
: Adjusted value
023 102C00
Remote commander LCD display
00
: Adjusted value
023 102C02
Remote commander LCD display
02
: Adjusted value
023 102D00
Remote commander LCD display
00
: Adjusted value
023 102F00
Remote commander LCD display
00
: Adjusted value
023 102FDF
Remote commander LCD display
DF
: Adjusted value
023 ****09
Remote commander LCD display
09
: Adjusted value
023 1028B6
Remote commander LCD display
B6
: Adjusted value
023 102900
Remote commander LCD display
00
: Adjusted value
023 102DD0
Remote commander LCD display
D0
: Adjusted value
023 Patch 01
Remote commander LCD display
01
: Adjusted value
023 104800
Remote commander LCD display
00
: Adjusted value