Filter
Top Products
19
Parameters in the PARALLEL INPUT FUNCTION setup box
Parameter
—————
A: Selects A.
to
F: Selects F.
OFF: Enters the off state.
Mic1: Selects Mic1.
to
Mic4: Selects Mic4.
Mic5Line1: Selects Mic5/Line1.
Mic6Line2: Selects Mic6/Line2.
Line3: Selects Line3.
Line4: Selects Line4.
Out1: Selects output channel 1.
to
Out8: Selects output channel 8.
MasterA: Selects Master A.
MasterB: Selects Master B.
Remote1: Selects Remote1.
to
Remote6: Selects Remote6.
1: Recalls scene No. 1.
to
20: Recalls scene No. 20.
Play: Starts playback.
Pause: Pauses or restarts playback or recording.
Stop: Stops playback or recording.
FF: Starts playback in fast forward.
Rew: Starts playback in rewind.
Rec: Starts recording.
Next: Moves to the next track.
Prev: Returns to the previous track.
On: Turns on the power.
Standby: Sets the power in the standby state.
—————
Parameters in the PARALLEL OUTPUT FUNCTION setup box
Parameter
—————
A: Selects A.
to
F: Selects F.
OFF: Enters the off state.
Mic1: Selects Mic1.
to
Mic4: Selects Mic4.
Mic5Line1: Selects Mic5/Line1.
Mic6Line2: Selects Mic6/Line 2.
Line3: Selects Line3.
Line4: Selects Line4.
Out1: Selects output channel 1.
to
Out8: Selects output channel 8.
MasterA: Selects MasterA.
MasterB: Selects MasterB.
1: Recalls scene No. 1.
to
20: Recalls scene No. 20.
On: Turns on the power.
Standby: Sets the power in the standby state.
Function
NONE: Does not set any function.
AV SEL: Outputs the tally signal when LINE4 input is selected.
–
∞: Outputs the tally signal when the
–
∞ indicator lights.
Over: Outputs the tally signal when the Over indicator lights.
RECALL: Outputs the tally signal when the desired scene No. is recalled.
PJ Power: Outputs the tally signal when the projector power is
controlled.
Function
NONE: Does not set any function.
AV SEL: Selects the LINE4 input.
LVL+: Increases the sound volume with an external switch.
LVL–: Decreases the sound volume with an external switch.
LVL: Adjusts the sound volume with an external sound volume controller.
Muting: Performs muting.
RECALL: Recalls the desired scene No.
LINE3 Control: Controls the device connected to LINE3.
LINE4 Control: Controls the device connected to LINE4.
PJ Power: Controls the projector power.
(Turn on the projector power when the parallel input terminal
is set to ON. Set the projector power to standby when the
parallel input terminal is set to OFF.)