Filter
Top Products
28
The User Control Panel software enables you to operate the SRP-X700P more simply from a personal
computer that you may use for presentations and other purposes.
Section 2 User Control Panel
Note
Start up the User Control Panel after connecting the SRP-X700P to
the personal computer.
To connect the SRP-X700P to the personal computer, use a USB
cable (TYPE-B).
AV CONTROL block
You can select an input machine connected to LINE 4 and operate
the remote control of the selected machine.
1 LINE4 input select button
This button corresponds to LINE4 input select buttons A to F
of the SRP-X700P.
The button indicates an index that is set in the SRP-X700P by
the SRP-X700P Manager.
The selected button lights in green.
2 REMOTE CONTROL button
You can remotely control the machine selected by the LINE4
input select button. If a machine that does not accept remote
control signals is connected, remote control is disabled in the
machine.
You can operate the functions PREV. (previous track), NEXT
(next track), STOP (stop), REW. (rewind), PLAY (playback),
F.F. (fast forward) and PAUSE (pause).
VOLUME control block
You can operate and mute the MASTER volume control of the
SRP-X700P from a remote location.
Names and Functions
of Controls on Screen
2
1
1 MASTER index
Displays the indexes of the MASTER A and MASTER B that
are set using the SRP-X700P Manager.
2 VOLUME button
Adjusts the MASTER volume level. Clicking the v or V
button increases or decreases the MASTER volume level. (The
volume knob of the SRP-X700P does not move.) This button
is disabled during muting.
3 Fader position indicator (MASTER A and
MASTER B)
Indicates the VOLUME control position.
4 MUTING button
You can mute each MASTER channel. The VOLUME buttons
lit in red are disabled during muting.
5 OVER GAIN indicator
The OVER GAIN indicator lights in red when the MASTER
fader is increased exceeding the GAIN LIMIT set by the SRP-
X700P Manager. The sound volume does not increase even if
the MASTER fader is increased exceeding the GAIN LIMIT
value.
6
–
∞ indicator
The
–
∞ indicator lights in yellow if no sound is output during
muting or when the INPUT fader is at the
–
∞ level position.
SCENE RECALL Block
You can recall the scene that was memorized before using the SRP-
X700P Manager.
1 SCENE RECALL button
This button corresponds to the SCENE RECALL buttons A to
D on the front panel of the SRP-X700P. The selected SCENE
button lights in green.
2 SCENE RECALL index
Displays the index set by the SRP-X700P Manager.
1
5
2
3
6
2
5
6
3
4
12