Filter
Top Products
27
1.7 SCENE Screen
You can set scenes from this screen.
You can store the setups on each screen of INPUT, ROUTING, OUTPUT and GROUP FADER into the internal memory of the SRP-X700P
or call them from the scene memory.
SCENE block
You can recall, store or clear the scenes.
To recall the scene that is set
• Select the scene No. that you want to recall, using the
1 SCENE No. button.
• Click the 2 RECALL button.
To memorize the parameter that is set
• Select the scene No. that you want to memorize, using the
1 SCENE No. button.
• Enter the 3 SCENE index. You can enter up to 8 alphanumeric
characters.
• Select the function that you want to memorize, from the
4 FUNCTION area.
When recalling the scene, only the function that is selected here
is recalled.
• ALL FUNCTIONS button
Select all functions.
• INPUT FUNCTION button
Memorizes all functions of the INPUT screen except the
MUTING button, INPUT fader and LINE4 select button.
• INPUT MUTING button
Memorizes the MUTING button state of the INPUT screen.
• INPUT FADER button
Memorizes the INPUT FADER.
• AV SELECTOR button
Memorizes the LINE4 select button state.
• ROUTING button
Memorizes the ASSIGN button state of the ROUTING screen.
• OUTPUT FUNCTION button
Memorizes all functions of the OUTPUT screen except the
MUTING button and OUTPUT fader button.
• OUTPUT MUTING button
Memorizes the MUTING button state of the OUTPUT screen.
• OUTPUT FADER button
Memorizes the OUTPUT fader.
• GROUP MUTING button
Memorizes the MUTING button state of the GROUP FADER
screen.
• GROUP FADER button
Memorizes the fader selector button state of the GROUP
FADER screen.
• Click the 5 STORE button.
Clearing the setup scene
• Select the scene No. that is to be cleared using the 1 SCENE
No. button.
• Click the 6 CLEAR button.
7 FRONT PANEL SCENE RECALL
You can assign the scene numbers (1 to 20) to recall, using the
SCENE RECALL buttons A to D on the front panel of the
SRP-X700P.
8 Information
Enter a comment for the setup file. You can enter up to 128
alphanumeric characters.
9 Power On Setting setup box
You can select the setup of the SRP-X700P at the time of
power-on. Clicking the Power On Setting setup box displays
the dropdown list. Select the desired setup.
• LAST MEMORY: The setup immediately before the
previous power-off is set.
• DEFAULT:The default setup when shipped from the factory
is set.
• SCENE No. 1: Scene No. 1 is recalled.
4
8
7
6
9
1235