Filter
Top Products
45
9.4. Filter Settings
ON
When any of the following screens is displayed, the filter function for the displayed channel can be
enabled or disabled by pressing the function ON/OFF key. When enabled (ON), the function
ON/OFF Indicator lights.
[Screen display operations]
[OUT1] FILTER1
TYPE THR
U
[OUT1] FILTER1
TYPE PE
Q
[OUT1] FILTER1
TYPE HPF- 6d
B
Parametric equalizer
High-pass filter (6 dB)
Low-pass filter (12 dB)
Horn equalizer
Notch filter
All-pass filter
Low shelving filter
High shelving filter
High-pass filter (12 dB)
Low-pass filter (6 dB)
Gain
Filter 1 settings (Type selection)
Gain
Center frequency
Gain
Roll-off frequency
Gain Roll-off frequency
Cutoff frequency
[OUT1] FILTER1
TYPE LPF- 6dB
Cutoff frequency
Q
[OUT1] FILTER1
TYPE HPF- 12dB
Cutoff frequency
Q
[OUT1] FILTER1
TYPE NOTCH
Center frequency
[OUT1] FILTER1
TYPE ALL PASS
Center frequency Q
[OUT1] FILTER1
TYPE LPF- 12dB
Cutoff frequency
[OUT1] FILTER1
TYPE HORN E
Q
[OUT1] FILTER1
TYPE H-She l
v
[OUT1] FILTER1
TYPE L-She lv
Q
Output channel gain settings (p. 42), Output channel group
trim gain settings (p. 42), or Crossover settings (p. 43)
Filter 6* settings (Type selection)
Compressor settings (p. 50)
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
PARAMETER
PUSH-ENTER
CHANGE
[OUT1] FILTER1
GAIN +0.0d
B
[OUT1] FILTER1
FREQ 1. 00kHz
[OUT1] FILTER1
Q 0.267
[OUT1] FILTER1
FREQ 1. 00kH
z
[OUT1] FILTER1
GAIN +0.0d
B
[OUT1] FILTER1
FREQ 6. 00kHz
[OUT1] FILTER1
GAIN +0.0d
B
[OUT1] FILTER1
GAIN +0.0d
B
[OUT1] FILTER1
FREQ 6. 00kH
z
[OUT1] FILTER1
FREQ 1. 00kH
z
[OUT1] FILTER1
Q 0.50
0
[OUT1] FILTER1
FREQ 1. 00kHz
[OUT1] FILTER1
Q 0.50
0
[OUT1] FILTER1
FREQ 1. 00kHz
[OUT1] FILTER1
Q 8.65
1
[OUT1] FILTER1
FREQ 1. 00kHz
[OUT1] FILTER1
FREQ 1. 00kH
z
[OUT1] FILTER1
Q 0.26
7
Q
Tip
Filters range from 1 to 6 in number, and the setting items for each filter are the same. Press the and shift
keys to change the filter number.
* The number of displayed filters differs
depending on the crossover configuration
settings on the Utility setting screen. (Refer
to p. 62.)