Filter
Top Products
01X Owner’s Manual
Function Tree/Function List
103
Before UsingBasics SectionAppendix Getting StartedReference
1 – 7 EFFECT1/2 PARAMETER (Effect 2 is 48kHz/44.1kHz mode only)
z
– v (Effect Parameters)
Determines the effect parameters. Parameters depend on the Effect Types
selected in the Library (see the Effect Library List).
No 126
EFFECT1/2 LIBRARY
q
– r
01 – 128
(Library number)
Determines the Library number. Preset Effect numbers (01 – 43; see page
125) are indicated by asterisks (*) in the display and cannot be changed.
No 125
z – v (Title Edit)
Determines the title (name) of the Effect Library.
No 41
b RECALL
For calling up the selected Effect Library. The confirmation prompt can be
turned on/off as desired. (See “Recall Confirmation” on page 95.)
Ye s 5 4
n STORE
Effect settings are stored to internal memory in the Effect Library. Up to 85
settings (common to Library 1 and 2) can be stored. The confirmation prompt
can be turned on/off as desired. (See “Store Confirmation” on page 95.)
•Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Ye s 6 5
m CLEAR
This deletes the selected Effect Library.
Ye s
CHANNEL LIBRARY [SHIFT] + [SELECTED CHANNEL]
q
– r
00 – 128
(Library number)
Determines the Library number. Preset Channel numbers are indicated by
asterisks (*) in the display and cannot be changed.
The following presets are available.
• 00 Reset (-
∞
dB): This preset memory resets all parameters of the cur-
rently-selected channel to their initial values and sets
the channel fader level to -
∞
dB.
• 01 Reset (0dB): This preset memory resets all parameters of the cur-
rently-selected channel to their initial values and sets
the channel fader level to 0dB (i.e., nominal).
No 36
z – v (Title Edit)
Determines the title (name) of the Effect Library. The category (IN/BUS/
AUX/ST) is shown following the name, for all Library Scenes, excepting pre-
sets.
No 41
n RECALL
For calling up the selected Library. The Libraries that can be recalled from the
channel Library are limited to ones whose category is the same as the cur-
rently selected channel. For example, you can recall Input Channel settings to
Input Channels, but not to Aux Out 1 through 4, with the exception that mem-
ories #0 and #1 can be recalled to any channels.
Ye s 5 4
m STORE
Channel settings are stored to internal memory in the Channel Library. Up to
127 settings can be stored. The confirmation prompt can be turned on/off as
desired. (See “Store Confirmation” on page 95.)
•Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Ye s 6 5
, CLEAR
This deletes the selected Channel Library.
Ye s
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]