Filter
Top Products
01X Owner’s Manual
Function Tree/Function List
97
Before UsingBasics SectionAppendix Getting StartedReference
EQ ON/OFF
z
– ,
(z)
ON/OFF
Turns the EQ on or off. The LOW-band EQ functions as a high-pass filter
when the Q parameter is set to HPF. It functions as a shelving-type EQ when
the Q parameter is set to L.SHELF. The L and R settings of the ST IN chan-
nel’s EQ are linked together.
No u
ATT (Attenuate) (Selected Channel only)
(w)- 96.0dB – +12.0dB
Determines the amount of pre-EQ signal attenuation in dB.
No t
■ EQ LIBRARY (Selected Channel only)
(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])
See EQ High (page 98)
No
EQ LOW-MID [INTERNAL] → ([SELECTED CHANNEL]) → [EQ LOW-MID]
EQ LOW-MID GAIN/EQLM-G
q
– i
(y)
-18.0dB – +18.0dB
Adjusts the gain level. Pressing the [EQ LOW] and [EQ HIGH] buttons
simultaneously resets all band parameters (gain, frequency and Q) for the
selected channel.
No
EQ LOW-MID FREQUENCY/EQML-F
q
– i
(t)
21.2Hz – 20.0kHz
Adjusts the frequency.
No
EQ LOW Q/EQL-Q
q
– i
(r)
10.0 – 0.10
Determines the bandwidth of the EQ processing.
No
EQ ON/OFF
z
– ,
(z)
ON/OFF
Turns the EQ on or off. The L and R settings of the ST IN channel’s EQ are
linked together.
No u
ATT (Attenuate) (Selected Channel only)
(w)- 96.0dB – +12.0dB
Determines the amount of pre-EQ signal attenuation in dB.
No t
■ EQ LIBRARY (Selected Channel only)
(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])
See EQ High (page 98)
No
EQ HIGH-MID [INTERNAL] → ([SELECTED CHANNEL]) → [EQ HIGH-MID]
EQ HIGH-MID GAIN/EQHM-G
q
– i
(y)
-18.0dB – +18.0dB
Adjusts the gain level. Pressing the [EQ LOW] and [EQ HIGH] buttons
simultaneously resets all band parameters (gain, frequency and Q) for the
selected channel.
No
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]