Filter
Top Products
CHAPTER 8: Internet Direct Connection (IDC) Service
90
Continue to next page...
English
The following confirmation dialog appears when
the download process is completed.
4
Tap on the desired option ( or
).
Note: The installation process starts
automatically when you reboot the Disklavier.
Note: Since the installation process starts
when the Disklavier is rebooted, it may take
longer than usual to operate the Disklavier after
power up.
Note: You cannot cancel the installation
process once it has started.
Tap to cancel the
installation process.
Tap to reboot the
Disklavier and install
the firmware.
Tap to install the
firemware next time
you turn on the
Disklavier.
You can change various settings related to the Internet
connection. In most cases, you do not have to change the
default factory settings.
You can access setup options by tapping on in
the [Setup] screen.
[Use DHCP]:
Select the method to determine several addresses. If
your router has DHCP server function, we
recommend that you to select [DHCP] or
[DHCP+DNS].
[DNS1]/[DNS2]:
Enter the address of the primary and secondary DNS
server. These settings must be made when [Use
DHCP] is set to [DHCP+DNS] or [MAN.].
Setting Up the Disklavier for
Internet Connection