Yamaha PRO/Mark IV Musical Instrument User Manual


 
CHAPTER 9: Troubleshooting
93
The Disklavier does not recognize an USB
flash memory.
The Disklavier restricts the usage of the USB flash
memories to seven identical ones by recognizing the ID
information of the memories that have been inserted to
the USB port. ( pg. 2) If you use USB flash
memories other than the ones already recognized, shut
down the Disklavier once before using them.
Certain USB storage devices may not function properly
with the Disklavier PRO/Mark IV Series. For a list of
compatible products, please visit
www.yamaha.com/disklavier.
The Disklavier does not read a CD-R/-RW.
The song files should be formatted in ISO 9660
LEVEL1. The Disklavier may not read song files other
than this format.
Some notes drop out during playback.
In Acoustic mode, when a piano song is played back at
a low volume, some notes in trill or tranquil part may
drop out. This is a characteristic of the Disklavier and
not a malfunction.
PianoSmart playback cannot be performed.
Makes sure that the numbers indicated on both the
SmartPianoSoft floppy disk and the paired CD are the
same.
The I/O Center becomes hot.
Although the chassis of the I/O Center may become hot
while the Disklavier is turned on (also in Standby
mode), this is not a malfunction.
Noise is heard from the I/O Center.
The I/O Center contains HDD (Hard Disk Drive) and
the HDD makes a disk spinning noise. This is not a
malfunction.