Filter
Top Products
CHAPTER 1: Getting Started
5
A TO PD terminal
Accepts the power cord from the Pedal Drive (PD)
unit.
B TO MD terminal
Accepts the power cord from the Motor Drive (MD)
unit.
C TO PS terminal
Accepts the power cord from the Power Supply (PS)
unit.
D TO I/O CENTER (GREEN/BLUE) jacks
Accept the cords from the I/O Center.
E TO SENSOR port
Accepts the cable from the Disklavier.
A MAINS switch
Turns the Power Supply unit on/off.
B AC OUTLET
Accepts the power cable from the I/O Center.
C AC IN
Accepts the power cable from an AC outlet.
D AC OUTLET SWITCHED
Accepts the Monitor speakers’ AC power cables.
E AC OUTLET (unswitched)
Accepts the AC power cord of the cradle’s AC power
adaptor.
TO PD TO MD TO PS TO SENSOR
GREEN
TO I/O
BLUE
CENTER
Centra
l
S
i
gna
l
Processor
— Front —
Note: The location of
each unit differs
depending on the model.
MAINS AC
OUTLET
2A
480VA
AC
OUTLET
2A
480VA
TOTAL
AC
IN
SWITCHED
Power Supp
l
y Un
i
t
— Front —
Note: The location of
each unit differs
depending on the model.