Filter
Top Products
30 M2500—Owner’s Manual
The Scene Memory function
What is scene memory?
Scene memory is a function that stores the on/off sta-
tus of the monaural/stereo input channels, the G1/
A7–G8/14 section, the STEREO section, and the
MONO/C section as one of 128 “scenes.” A scene that
has been stored can be easily recalled at any time.
Program change messages received at the MIDI IN
connector can also recall scenes, and when a scene is
recalled, a corresponding program change message
can be transmitted from the MIDI OUT connector.
With the factory settings, the scenes stored in the
M2500 are set as follows. Of these, scene memory
numbers 1–128 can be rewritten, and 129 and 130 are
for recall only.
Scene memory operations are performed in the Con-
trol section. For details on the parts of the control
section and their function, refer to page 22.
Modes of the scene memory
function
The Scene Memory function has the following three
modes.
● Normal mode
This is the normal operating mode in which scenes
are recalled and stored. When the M2500 is in Nor-
mal mode, the indicators of the CHECK switch and
UTILITY switch in the control section will be dark.
For details on operation in Normal mode, refer to
page 31.
● Check mode
In this mode you can check the contents of a scene
before you recall it, or edit the on/off settings of a
saved scene without changing the current on/off sta-
tus. In Check mode, the indicator of the CHECK
switch will be lit. For details on operation in Check
mode, refer to page 32.
● Utility mode
In this mode you can make various settings related to
scene memory and MIDI. In Utility mode, the indi-
cator of the UTILITY switch will be lit. For details on
operation in Utility mode, refer to page 34.
Scene memory
number
Contents
1 All on
2 All off
3 All on
4 All off
5 All on
6 All off
7 All on
8 All off
9–128 No data
129 All on
130 All off
Note: With the factory settings, the M2500 will
start up with scene memory number 1 recalled.