Filter
Top Products
17
Step 7. Install Carrier into C-Size VXI Mainframe
WARNING To avoid possible electrical shock, make certain that power is removed from the
VXI mainframe, all field wiring, and external devices connected to the VXI
mainframe.
1. Set the Carrier Extraction
2. Slide the Carrier into any slot
(except Slot 0) until the backplane
connectors touch.
3. Seat the Carrier
into the mainframe by
pushing in the extraction
levers.
4. Tighten the top and bottom screws
to secure the Carrier
to the mainframe.
Levers out.
Note: Do not push on the front
panel of the E2251A Carrier.
Doing so may bend the front panel.