Filter
Top Products
NXC-M Master Card
9
NetLinx Master Cards and Modules
3. Mount the NCP-E to the NXC-M, as shown in FIG. 7.
a. Lower the rear edge (with the Ethernet connector and LEDs) of the NCP-E first.
b. Align the connector with the opening in the rear plate.
c. Lower the other end of the NCP-E, mating the connectors on both cards.
4. Tighten the four screws (included) to secure the Ethernet port card to the NXC-M.
FIG. 6 Installing the new rear plate
FIG. 7 Installing the NCP-E Ethernet Card
NCP-E Ethernet Port Card
Ethernet connector housing
Port Card connector