Filter
Top Products
NetLinx Security
40
NetLinx Master Cards and Modules
least 4 characters long and no more than 20 characters. Any combination of letters, numbers, or
other characters may be used.
After the password is entered, if the password is correct you will see a welcome banner as shown
below:
Login: User1
Password: *****
Welcome to NetLinx v2.10.80 Copyright AMX Corp. 1999-2002
>
If the password is incorrect, the following will be displayed:
Login: User1
Password: *****
Login not authorized. Please try again.
After a delay, another login prompt will be displayed to allow the user to try again. If after 5
prompts, the login is not done correctly the following will be displayed and the connection closed:
Login not allowed. Goodbye!
If a user opens a connection but does not enter a user name or password (i.e. they just sit at a login
prompt), the connection will be closed after 1 minute.
Logout
The logout command will log the user out of the current secure telnet session. For a Telnet
connection, the session will be closed and the connection between the Telnet client and the NetLinx
master will be dropped. For a Terminal session, the user will be logged out and to access Terminal
commands again the user will first have to login.
Help Security
The help security command will display the security menu as shown previously.
Setup Security
The security command displays a series of menus that allow the security administrator to create and
edit users, create and edit groups, and setup directory associations for the Web Server. A user must
be given rights to access this command. Any user that does not have rights to Security
Configuration will see the following message when trying to access the setup security command:
>setup security
You are not authorized to access security commands
If a user is authorized, or if Security Configuration security is not enabled, the Main Security Menu
will be displayed.