Filter
Top Products
Programming
23
NetLinx Master Cards and Modules
Program Port Commands (Cont.)
SET TIME
Prompts you to enter the new time for the Master Card.
When the time is set on the Master Card, the new time will be reflected on
all devices in the system that have clocks (i.e. touch panels). By the same
token, if you set the time on any system device, the new time will be
reflected on the system’s Master, and on all connected devices.
This will not update clocks on devices connected to another Master (in
Master-to-Master systems).
SET URL <D:P:S>
Prompts you to enter the URL address and port number. Then, you enter
Y (yes) to approve/store the new addresses in the Master Card.
Entering N (no) cancels the operation.
SHOW DEVICE <D:P:S>
Displays a list of all devices present on the bus.
SHOW LOG
Displays the log of messages stored in the Master's memory.
The Master logs all internal messages and keeps the most recent mes-
sages. The log contains:
• Entries starting with first specified or most recent.
• Date, Day, and Time message was logged.
• Which object originated the message.
• The text of the message:
SHOW LOG [start] [end]
SHOW LOG ALL
• If start is not entered, the most recent will be first.
• If end is not entered, the last 20 messages will be shown.
• If ALL is entered, all stored messages will be shown, starting with the
most recent.
SHOW NOTIFY
Displays a list of devices that other systems have requested input from and
the types of information needed. Note that the local system number is
1061.
SHOW REMOTE
Displays a list of devices this system requires input from and the types of
information needed. If when a NetLinx master connects to another NetLinx
master, the newly connecting system has a device that the local system
desires input from; the new system is told what information is desired from
what device. Note the local system number is 1062.
SHOW ROUTE
Displays information about how this NetLinx master is connected to other
NetLinx masters.
SHOW SYSTEM
Provides a list of all devices in all systems currently on-line. The systems
lists are either directly connected to this master (i.e. 1 hop away), or are
referenced in the DEFINE_DEVICE section of the NetLinx program. You
may provide the desired system number as a parameter to display only
that system's information (e.g. SHOW SYSTEM 2001). The systems listed
are shown in numerical order.
TCP LIST
Lists all active TCP/IP connections.
TIME
Displays the current time on the Master Card.
URL LIST <D:P:S>
Displays the list of URL addresses programmed in the Master Card.