Filter
Top Products
Programming
22
NetLinx Master Cards and Modules
Program Port Commands (Cont.)
Command Description
MSG ON or MSG OFF
MSG On sets the terminal program to display all messages generated by
the Master Card. MSG OFF disables the display.
OFF
Turns off a channel on a device. The device can be on any system the
master you are connected to can reach. You can specify the device num-
ber, port, and system, or the name of the device defined in the
DEFINE_DEVICE section of the program.
ON
Turns on a channel on a device. The device can be on any system the
master you are connected to can reach. You can specify the device num-
ber, port, and system, or the name of the device that is defined in the
DEFINE_DEVICE section of the program.
PASS
Sets up a pass through mode to a device. In pass through mode, any
string received by the device is displayed on the screen; anything typed is
sent as a string to the device. The device can be on any system the master
you are connected to can reach. You can specify the device number, port,
and system, or the name of the device that is defined in the
DEFINE_DEVICE section of the program.
PING
Tests network connectivity to and confirms the presence of another net-
worked device. It operates just like the PING application in Windows or
Linux.
PROGRAM INFO
Displays the NetLinx program's name residing in the Master Card.
PULSE
Pulses a channel on a device on and off. The device can be on any system
the master you are connected to can reach. You can specify the device
number, port, and system, or the name of the device that is defined in the
DEFINE_DEVICE section of the program.
REBOOT <D:P:S>
Reboots the Master Card or specified device.
RELEASE DHCP
Releases the DHCP setting for the Master Card.
SEND_COMMAND
Sends a command to a device. The device can be on any system the mas-
ter you are connected to can reach. You can specify the device number,
port, and system, or the name of the device that is defined in the
DEFINE_DEVICE section of the NetLinx Program. The data of the string is
entered with NetLinx string syntax.
SEND_STRING
Sends a string to a device. The device can be on any system the master
you are connected to can reach. You can specify the device number, port,
and system, or the name of the device defined in the DEFINE_DEVICE
section of the NetLinx Program. The data of the string is entered with
NetLinx string syntax.
SET DATE
Prompts you to enter the new date for the Master Card.
When the date is set on the Master Card, the new date will be reflected on
all devices in the system that have clocks (i.e. touch panels). By the same
token, if you set the date on any system device, the new date will be
reflected on the system’s Master, and on all connected devices.
This will not update clocks on devices connected to another Master (in
Master-to-Master systems).
SET DNS <D:P:S>
Prompts you to enter a Domain Name, DNS IP #1, DNS IP #2, and DNS IP
#3. Then, you enter Y (yes) to approve/store the information in the Master
Card. Entering N (no) cancels the operation.
SET IP <D:P:S>
Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address,
Subnet Mask, and Gateway IP address.
Enter Y (yes) to approve/store the information in the Master Card.
Entering N (no) cancels the operation.