Filter
Top Products
NetLinx Security
34
NetLinx Master Cards and Modules
Edit Group menu: List directory associations
1. At the Edit Group prompt, type 3 to list all existing directory associations. A sample session
response is:
The following directory associations are enrolled:
/directory1/*
/directory2/*
Press <ENTER> key to continue
2. Press <ENTER> to return to the Edit Group menu.
Edit Group menu: Change Access Rights
1. At the Edit Group prompt, type 4 to change the current access rights for the selected group
account. A sample session response is:
Select to change current access right:
1) Terminal (RS232) Access...................Disabled
2) Admin Change Password Access..............Disabled
3) FTP Access................................Disabled
4) HTTP Acccess..............................Disabled
5) Telnet Access.............................Disabled
6) Security Configuration Access.............Disabled
or <ENTER> to return to previous menu
Set Rights ->
2. Each selection simply toggles the security setting selected. <ENTER> is entered by itself to
exit the menu and return to the Main Security Menu.
Edit Group menu: Display Access Rights
1. At the Edit Group prompt, type 5 to view the current access rights for the selected group
account. A sample session response is:
Terminal (RS232)...................Disabled
Admin Password Change..............Disabled
FTP................................Disabled
HTTP...............................Disabled
Telnet.............................Disabled
Security Configuration.............Disabled
Press <ENTER> key to continue
2. Press <ENTER> to return to the Edit Group menu.
8) Edit Group
1. Type 8 and <ENTER> at the Security Setup prompt (at the bottom of the Main Security Menu)
to edit an existing group account. A sample session response is:
Select from the following list:
1) administrator
2) Group 1
3) Group 2
Select group ->
2. Select a group from the list of currently enrolled groups and press <ENTER> to open the Edit
Group Menu. This is the same Edit Group Menu that was access via the Add Group option: