Filter
Top Products
DX-700 • User’s Guide • Rev 02 169
5. Upgrading Firmware
Upgrading Firmware
S Example: DX700 package 0.01.f
c. Download all flash files and the script file:
CustomerCompleteLoad_RevB_Boards.sld
... and store everything in the created directory.
d. Expand the Config Tree overview until the DX-700 is visible.
e. Select the digitizer, and note that the version table will be filled out.
f. Use Reload Versions to display both the current version and the new
version in the
Version Table.
g. In the Version Table, check the flash type that must be updated.
h. Click the Start Update button. After the update has completed, a pop-up
message will prompt you to restart the DX-700 manually.
For additional information, please use the following resources:
• In the Director Toolset Reference Manual, refer to the “Flash Update” section
for additional information on flash updates.
• Contact Barco Technical Support for additional information. In Appendix C,
refer to the “
Contact Information” section on page 204.
Note
The Flashfiles folder may contain different package folders.