Filter
Top Products
DX-700 • User’s Guide • Rev 02 39
2. Hardware Orientation
DX-700 Front Panel
The following internal test patterns are provided:
• H Gray Ramp
• V Gray Ramp
• Color Bars
• 16 x 16 Grid
• 32 x 32 Grid
• Burst
• 75% Bars
• 50% Gray
• H Gray Steps
• V Gray Steps
• Adj (Adjust) Grid
• Black
• White
• Adj (Adjust) Color
Test patterns can be programmed in any of three forms:
• Each output port contains a test pattern sized to that port's output resolution.
• A single test pattern is created that fills the entire area of all stacked outputs within
an output bank.
• A single test pattern is created that fills the entire area of all outputs when stacking
multiple DX-700 units.
Please note the following additional points:
• The test pattern generator can also be programmed to individually enable or
disable each RGB primary. This feature allows the programmable gray level
pattern to generate any intensity of any primary.
• Any test pattern can be put into diagonal motion.
• The test pattern generator can create raster boxes, which encompass an
individual output's pixel area, the entire stacked output or the source’s perimeter.
In Chapter 4, refer to the “
Using the Test Pattern Menu” section on page 148 for
additional information.