Filter
Top Products
15
SYSTEM SETUP
SvenskaItalianoFrançaisEspañolDeutschDanskEnglish Nederlands
Connecting the T1 to your computer
The T1 provides a USB port for connecting it to a computer. This allows you to download performance scenes to a
computer or install system updates. Visit www.Bose.com/musicians for details on updating your system.
When connected to a computer, you also can use the T1 as a general-purpose USB audio device for recording and
playback.
Note: The T1 operates at 48kHz/24-bit. When using the T1 with recording software, you may need to configure the
software settings for 48kHz/24-bit operation.
Connecting the T1 to your computer requires a USB cable (Type A to Type B, not supplied).
1. Connect the T1 audio engine either to your L1 model II system or a T1 power supply (see “Connecting the T1
ToneMatch
TM
audio engine power supply (optional)” on page 14).
2. Plug one end of the USB cable into the T1 audio engine USB port (Figure 13).
3. Plug the other end of the USB cable into a USB port on your computer.
4. Turn on the T1 audio engine.
Figure 13
T1-to-USB
connection
USB cable
(Type A to Type B)
To
computer
USB port
Power switch
ToneMatch port – To an L1 model II system
or a T1 ToneMatch power supply.