Bose T1 Music Mixer User Manual


 
OPERATING INSTRUCTIONS
20
EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk
Editing the sound of a channel
The CH Edit functions allow access to settings that affect selected channels. The CH Edit functions are Aux, Tuner,
ToneMatch the engine, zEQ, Para EQ, Comp/Gate, Mod, Delay, and Reverb.
To edit a channel:
1. Press the CH Edit 1, 2, 3, or 4/5 button. The CH Edit button glows blue, indicating that the channel is
enabled for editing.
2. Select one of the CH Edit functions using the T1 rotary selector.
3. Adjust the settings for that function using the following instructions.
Note: You can only edit one channel at a time. Pressing a CH Edit button enables editing only for the selected channel.
All other CH Edit buttons are dimmed to indicate they are inactive.
Selecting a ToneMatch™ preset
The ToneMatch
TM
engine function allows you to select a ToneMatch preset for your instrument or microphone. This
proprietary technology optimizes system equalization to preserve the natural sound of your specific instrument or
microphone. They are organized into categories and independently selected for each channel.
Note: To bypass the selected ToneMatch preset, press the Category button. Press it again to activate.
1. Rotate the Category button to access the list of categories and highlight your choice.
2. Press the Select button to select your choice, or press the Cancel button to exit the list with no change.
CH 1 ToneMatch(tm)
Utility
Flat
Category Preset
Select Cancel
Utility
Vocal Mics
Electric Guitars
Acoustic Guitars
Rotate
Press