Filter
Top Products
Out L - R Adjusts the left or right output level of the pitch-shifted voice. Ranges from Off to 100%.
Out LA - LA Adjusts the left-side level of pitch-shifted voice A or B. Ranges from Off to 100%.
Out RA - RB Adjusts the right-side level of pitch-shifted voice A or B. Ranges from Off to 100%.
Spread Controls the width of the effect’s stereo imaging. The higher the setting, the wider the image The lower the setting,
the more monophonic the effect becomes. Ranges from 1 to 10.
Whammy Effects
In today’s music industry, it seems that every album on the charts, whether it be Country, Rock, Industrial, or Alternative, are using the
Whammy technology in some shape or form. Whether it be a subtle chorus Detune, or an all out 2 octave Whammy Dive, this thing is a
definite attention getter, and first-call studio effect. At this rate, the Whammy effect could possibly log-in as much studio time as Chet Atkins.
Whammy Effect Parameters
Whammy On/Off Turns the Whammy module on or off. When the module is turned off, the signal will only continue to pass through
the module if the dry level is turned up.
FX Level This parameter lets you select the overall FX level mix of the Whammy Effect module. Ranges from: Off to 100%.
Dry Level This parameter lets you select the amount of Dry signal that is included in the Whammy effect. Ranges from: Off to
100%.
Balance This parameter allows you to pan the Dry signal either to the Right or the Left in the stereo soundfield. Ranges from
Left 99 to Right 99.
Min Shift This parameter sets the minimum pedal shift level of the Whammy effect. Ranges from: -72 (6 octaves down), to 24
(2 octaves up).
Max Shift This parameter set the maximum pedal shift level of the Whammy effect. Ranges from: -72 (6 octaves down), to 24
(2 octaves up).
Min Detune This parameter sets the minimum pedal level of detune effect. Ranges from: -50% (down 50 cents), to 50% (up 50
cents).
Max Detune This parameter sets the maximum pedal level of detune effect. Ranges from: -50% (down 50 cents), to 50% (up 50
cents).
Pedal This parameter is used for the assignment of an expression pedal. This parameter also shows the pedal travel range.
Ranges from: 0 to 100
Out This parameter is used to set the overall output level of the Whammy module. Ranges from: 0 to 100%
Pan This parameter is used to position the Whammy effect in the Stereo soundfield. Ranges from: Left 99 to Right 99.
Auto Wah
Break out the Bell-bottom jeans and the Disco mirror balls, because the Auto-Wah is here to play. The Auto Wah is a great effect use when
you want a nasally wah-type effect, but you don’t want to do the leg work. The Auto Wah utilizes a sensitivity detector that reads the input
signal, then simulates the action of a wah pedal.
43
RP21D User’s Guide Section Two - Editing Functions