Filter
Top Products
To Perform either a Bulk Dump or a System Dump, do the following:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 7. The Display reads:
2. The number three icon is indicating that you must press the number three button in order to access the Bulk Dump function. You can
then rotate the Data Wheel to initiate the Bulk Dump. You must have the MIDI out of the RP21D connected to a MIDI recorder and the
MIDI recorder must be set to record before initiating the dump. The Display will briefly read ” Midi Bulk Dump” followed by the
number ber of bytes it is sending. It will then return to the SysEx Dump page.
3. The number four icon is indicating that you must press the number four button in order to access the System Dump function. You can
then rotate the Data Wheel to initiate the System Dump. You must have the MIDI out of the RP21D connected to a MIDI recorder and the
MIDI recorder must be set to record before initiating the dump. The Display will briefly read
” Sending System Dump.” It will then return to the SysEx Dump page.
Program Dumps
The Program Dump allows you to dump individual RP21D Programs to another RP21D or external MIDI devices like patch librarians,
computers, or sequencers for backup, storage, or organization. This option allows you to select the Program to be dumped, and, when
dumping to another RP21D, the Program location where you want the Program dumped.
To initiate an individual patch dump from the RP21D, do the following:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 8. The display reads:
2. Press the number three button and then rotate the Data Wheel to select the Program number you want to dump.
3. Press the number four button and then rotate the Data Wheel to select the Program location where you want the Program dumped.
4. To initiate the dump, press the number one button and then rotate the Data Wheel. The Information line briefly reads ”Sending Program
Dump.” It will then return to the SysEx Dump Page.
User Default Dump
The User Default Dump allows you to dump individual RP21D User defaults to another RP21D or external MIDI devices like patch librarians,
computers, or sequencers for backup, storage, or organization. This option allows you to select the default to be dumped.
To initiate an individual Default dump from the RP21D, do the following:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 9. The display reads:
SysExDump UserPrg≥PrgNum
2
FACTORY USER
%kHz
msdB
Yes
1
CHANGEDLINK
%kHz
msdB
2
CHANGEDLINK
%kHz
msdB
1
3
CHANGEDLINK
1
4
CHANGEDLINK
PAGE
8
OF
15
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
BANK
SysExDump: Bulk System
2
USER
%kHz
msdB
1
CHANGEDLINK
2
CHANGEDLINK
%kHz
msdB
Yes
3
CHANGEDLINK
%kHz
msdB
yes
4
CHANGEDLINK
PAGE
7
OF
15
COMP WAH TUBE EQ
L/R OUTS
DIGITAL
#
b
GATE
BANK
57
RP21D User’s Guide Section Four - Utilities