3. This is your last chance to change your mind. If you want to abort the Reset procedure, press the number four button. If you are sure that
you want to reset all user settings, press the number three button. The display will briefly show “Resetting...” and take you to the Pedal
Calibration menu. See the following Utility menu for Pedal Calibration instructions.
Recalibrating the Expression Pedal
Occasionally, you will need to recalibrate the Expression Pedal on the RP21D. This will be indicated when the Expression Pedal does not
adjust its assigned parameter to the full minimum and maximum programmed values. You will also have to recalibrate the pedal after
performing a Factory Reset procedure. The procedure for recalibrating the Expression Pedal is as follows:
1. Press the Utility button once. Use the Next and Previous Page buttons until you reach page 14. The Display reads:
2. To initiate the Pedal recalibration, press the number one button. The Display reads:
3. At this point, rock the Expression Pedal all the way forward (toe down) and press the number one button once. The Display now reads:
4. Rock the Expression Pedal all the way back (toe up) and press the number two button. The Display will return to the start of the
Recalibrate Pedal menu.
You may exit the Utility menu at any time by pressing the Program button.
Push pedal back, press 2
2
FACTORY USER
1
CHANGEDLINK
1
2
CHANGEDLINK
1
3
CHANGEDLINK
dn
4
CHANGEDLINK
PAGE
15
OF
15
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQDIST
Push pdl forward,press 1
2
FACTORY USER
1
CHANGEDLINK
1
2
CHANGEDLINK
1
3
CHANGEDLINK
UP
4
CHANGEDLINK
PAGE
15
OF
15
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQDIST
Recalibrate Pedal ?
2
FACTORY USER
1
CHANGEDLINK
1
2
CHANGEDLINK
1
3
CHANGEDLINK
Yes
4
CHANGEDLINK
PAGE
15
OF
15
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQDIST
Are you sure ?
2
FACTORY USER
1
CHANGEDLINK
1
2
CHANGEDLINK
1
3
CHANGEDLINK
Yes
4
CHANGEDLINK
PAGE
14
OF
15
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQDIST
no
60
RP21D User’s Guide Section Four - Utilities