Filter
Top Products
10
Names of things and what they do
■
Front Panel
fig.1-01
1
Display
This shows various types of information (such as level meters or parameter values) related to the current
state.
2
VALUE dial
Turn this dial to change a parameter’s setting, or “value.” If you hold down [SHIFT] as you turn
[VALUE], the parameter’s value will change by larger increments.
3
INST (Instrument) Button
Use this button to select the instrument (sound) or drum set assigned to each part. (
"Selecting a sound"
(p. 26),
"Selecting a drum set"
(p. 27))
4
EFFECTS Button
Use this button to select an effect (MFX) for the internal sound generator, or to edit effect parameters
(
"About the sound generator effects"
(p. 39)).
5
SYSTEM Button
Use this button to make settings that affect the entire SD-80 system (
"System-related settings"
(p. 49)).
6
PART Buttons
Use these buttons to switch the part display.
If you press
[]
and
[]
simultaneously, all parameters will be displayed (
"Editing parameters that are
common to all parts"
(p. 32)).
7
VOLUME Knob
This knob adjusts the output level of the audio signal that is output from the rear panel
OUTPUT 1
jacks
and from the
headphone jack
.
fig.1-01a
8
POWER Switch
This turns the power of the SD-80 on/off. The
power is on
when the switch is pressed in, and the
power is off
when the
switch is in the outward position. When the power is on, the
white backlighting of the LCD screen will also be on.
1
16
2 3 546 7
8
1411
12
9
10
13 15
ON
Pressed in
OFF
Outward position