Filter
Top Products
32
Using the internal sound generator
■ Editing parameters that are common to all parts
Here’s an example of how to edit parameters that are common to all parts.
fig.5-12
1. Simultaneously press [PART ] and [PART ].
A screen will appear in which you can edit parameters for all parts.
fig.5-12a_67.2
2. Press [PAGE ] or [PAGE ] to select the parameter that
you want to edit (e.g., Master Volume).
3. Turn the [VALUE] dial to adjust the value of the
parameter you selected in step 2.
4. If you want to keep the results of your edit, hold down [SHIFT] and press [ENTER] after step 3. The
current setting will be transmitted from the USB connector ("USB mode" (p. 19)) or the MIDI OUT
connector ("MIDI mode" (p. 20)).
5. Press [INST] to return to the main screen.
4
1
2
3
5