Filter
Top Products
107
MR-8HD/CD Owner’s Manual (Track editing)
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
ABS ZERO
REC END
You can move whole data (from ABS ZERO to REC END) of the desired track(s) to the other
desired track(s). After the data is moved, the original track(s) is(are) silent. You can only move
track data within the current song.
<Note>:
You cannot move track data of a song pro-
tected. Release the protection before moving track
data.
1) Load the song you want to edit.
2) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
Back" is
highlighted initially (selecting "
Back"
returns to the previous screen).
3) Rotate the [MENU/ENTER] knob to select
"Track Edit
", and press the [MENU/ENTER] knob.
The display now shows the track edit menu
screen, where "
Back" is highlighted.
5) Rotate the [MENU/ENTER] knob to select
"Source Track = *", and press the [MENU/ENTER]
knob.
You can now select the desired move source
track(s) by rotating the [MENU/ENTER] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
6) Rotate the [MENU/ENTER] knob to select source
track(s), and press the [MENU/ENTER] knob.
You can now select the desired destination
track(s).
4) Rotate the [MENU/ENTER] knob to select
"Move Track
", and press the [MENU/ENTER]
knob.
The display now shows the screen for selecting
the source track(s) and destination track(s) of
the move operation. "Source Track" selects the
move source track(s), while "Dest. Track" selects
the move destination track(s).
Moving track data
Flashing
Flashing
Flashing