Filter
Top Products
116
MR-8HD/CD Owner’s Manual (Part editing)
You can copy the desired part(s) of the selected track(s) and paste it(them) to the other time
position of the desired track(s). Unlike the method described above in "Copying/pasting the de-
sired part(s) (1)", the part data is copied to the (virtual) clipboard and then pasted to the specified
position of the other specified track(s).
The copy/paste operation of a part or parts can be made only within the current song.
1) Load the song you want to edit.
2) Set the LOCATE A and LOCATE B points (see
page 49).
You can check the edited part(s) by playing
back between the LOCATE A and LOCATE B
points (see page 44).
3) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
Back" is
highlighted initially (selecting "
Back" returns
to the previous screen).
<Note>:
You cannot copy/paste track data of a song
protected. Release the protection before making
the copy/paste operation.
<Note>:
If you turn off the MR-8HD/CD after copy-
ing the part data to the clipboard, the data on the
clipboard is lost.
Also note that you cannot undo copying data to
the clipboard.
4) Rotate the [MENU/ENTER] knob to select
"Part Edit
", and press the [MENU/ENTER] knob.
The display now shows the part edit menu
screen, where "
Back" is highlighted.
<Note>:
If you paste the part(s) to the same time
position of the other track(s), we recommend us-
ing the method described above in "
Copying/past-
ing the desired part(s) (1)
", because it works faster.
5) Rotate the [MENU/ENTER] knob to select
"Copy Part
", and press the [MENU/ENTER] knob.
The display now shows the screen for selecting
the source track(s).
"
Back" is initially highlighted.
Copying to the clipboard
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
LOCATE B
point
Clipboard
(Virtual)
ABS ZERO
REC END
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
Copying/pasting the part(s)-2