Filter
Top Products
91
MR-8HD/CD Owner’s Manual (Data export to a personal computer)
5) Press the [MENU/ENTER] knob.
The MR-8HD/CD quits the conversion function
and the display returns to the home screen.
<Editing a file name>
You can edit a file name by the following
procedure.
2) Enter a new name using the character
entry keys.
Pressing a different character entry key
automatically moves the cursor right.
If two successive characters are assigned
to the same character entry key, rotate
the [MENU/ENTER] knob after selecting the
first character to move the cursor right.
<Note>:
If you convert data with the same
name as previously converted data, the fol-
lowing screen appears on the display.
This screen warns you that the WAV file with
the same name already exists and asks you
to carry out the conversion by overwriting
the existing file or cancel the conversion.
If you carry out the conversion by overwrit-
ing the existing file, rotate the [
MENU/EN-
TER
] knob to move the cursor to "
[YES]
",
and press the [
MENU/ENTER
] knob.
If you do not want to overwrite the existing
file, rotate the [
MENU/ENTER
] knob to move
the cursor to "
[NO]
", then press the [
MENU/
ENTER
] knob. The display returns to show
the screen for editing the file name, so you
can enter a different file name and then
carry out the conversion.
If you want to cancel the conversion when
the screen above is shown, rotate the [
MENU/
ENTER
] knob to move the cursor to "
[NO]
"
and press the [
MENU/ENTER
] knob to show
the screen for editing the file name, and then
press the [
STOP
] key to quit the conversion
function.
3) After entering a new name, press the
[MENU/ENTER] knob.
Then, by pressing the [MENU/ENTER] knob while
holding down the [RECORD] key to carry out the
WAV file conversion.
While the rightmost character is flash-
ing, pressing the [UNDO/REDO]/[DE-
LETE] key repeatedly deletes the cur-
rent file name.
When the conversion is completed, the display
shows "Completed".
Flashing
<Note>:
If you cancel the conversion in the
middle, no file (incomplete file) is created.
4) Press the [MENU/ENTER] knob while holding
down the [RECORD] key.
The file conversion starts and the percent
number on the screen counts up as the
conversion progresses.
To cancel the conversion in the middle, press
the [STOP] key.
1) After selecting the range of track data to be
converted, rotate the [MENU/ENTER] knob
to move the cursor to "NAME" and press
the [MENU/ENTER] knob.
The rightmost character of the file name
starts flashing. You can now start editing.