Filter
Top Products
77
MR-8HD/CD Owner’s Manual (Rhythm guide function)
Rhythm Guide: Off
Conductor Map: Off
Rhythm guide
No output
Bar/beat
indication
The "Signature"
and "Tempo"
item settings are
effective.
Rhythm Guide: Off
Conductor Map: On
No output
The conductor
map is effective.
Rhythm Guide: On
Conductor Map: Off
Output:
The tempo and
time signature
setting on this
screen is effec-
tive.
The "Signature"
and "Tempo"
item settings are
effective.
Rhythm Guide: On
Conductor Map: On
Output:
The conductor
map setting is
effective.
The conductor
map is effective.
On/off conditions
1. Rhythm Guide: On/off selection of the rhythm guide
The setting you make here is reflected to the
[RHYTHM GUIDE] key (the key is lit when ON, while
it is unlit when OFF). Conversely, when you turn
on or off the rhythm guide using the
[RHYTHM GUIDE] key, the status is reflected to
this screen. See the table on the right for details.
2. Conductor Map: On/off selection of the conductor map
This item enables or disables the conductor map
(see "Conductor map" described later).
The default is "Off". See the table on the right for
details.
3. Signature: Time signature setting
The default is "4/4". You can select from among
1/4 through 5/4 and 1/8 through 8/8.
The setting here is effective from the beginning to
the end of the song when the "Conductor Map" item
is set to "Off" (i.e. the same time signature all
through the song). When the "Conductor Map" item
is set to "On", the setting here is ineffective.
See the table on the right for details.
You can make setting for each item similarly.
The rhythm guide setting screen has the following
items.
To exit the menu mode, press the [STOP] key, or se-
lect "
Back" and press the [MENU/ENTER] knob re-
peatedly.
The table below shows how the "Rhythm Guide" and
"Conductor Map" item settings affect the conditions of
rhythm guide output and bar/beat indication.
3) Rotate the [MENU/ENTER] knob to select the
desired item, and press the [MENU/ENTER] knob.
The current setting of the selected item starts
flashing. On the screen examples below, the
"Rhythm Guide" item is highlighted (see the
upper screen) and the [MENU/ENTER] knob is
pressed (see the lower screen).
4) Rotate the [MENU/ENTER] knob to select the
desired option, and press the [MENU/ENTER]
knob.
The selected option (in the example above,
"On" or "Off") is confirmed and the display
returns to the previous screen.
4. Tempo: Tempo setting
The default is "120bpm". You can select between
30 and 250 bpm. The setting here is effective from
the beginning to the end of the song when the
"Conductor Map" item is set to "Off" (i.e. the same
tempo all through the song).
When the "Conductor Map" item is set to "On",the
setting here is ineffective. See the table on the
below for details.
5. Int ClickLevel: Internal click output level
The default is "80". You can set it between 0 and
99.
1
2
3
4
5
See the next page for details about how to set the
conductor map.
<Note>:
When “
Conductor Map
” is set to “
On
”, the
“
Signature
” and “
Tempo
” fields show “
- - -
” as be-
low. This indicates that the signature and tempo
values set on this screen are ineffective, while the
conductor map setting is effective.
Flashing