Filter
Top Products
93
MR-8HD/CD Owner’s Manual (Data export to a personal computer)
3) Highlight "USB " by rotating the [MENU/ENTER]
knob, then press the [MENU/ENTER] knob.
The display shows the USB menu screen.
1) Turn on the power of the personal computer and
the MR-8HD/CD.
2) Press the [MENU/ENTER] knob to enter the menu
mode.
The display now shows the first page of the
menu selection screen, where "
Back" is
highlighted initially.
<Important note>
Converted stereo WAV
files are located in the "2
MIX" folder in the Song
folder, as shown below. So
you can export only a ste-
reo WAV file in the "2 MIX"
folder (indicated by an ar-
row).
Note that, if you export a
WAV file which is located
in a folder other than the
"2 MIX" folder, the MR-
8HD/CD may malfunc-
tion.
Exporting a WAV file to a personal computer
The following describes the procedure for ex-
porting a WAV file to a Windows ME computer.
#####001.wav
Song
#####002.wav
#####003.wav
#####008.wav
2 MIX
*********.wav
5) Connect the MR-8HD/CD to a personal computer
using a USB cable.
6) Open "My computer" on the computer screen.
You see the "Removable disk" drive added on
the computer. The first time you connect the
MR-8HD/CD, the device driver is installed
automatically.
7) Open the added Removable disk drive, and
select the stereo WAV file in the desired song
folder, then copy to the computer.
When you open the added Removable disk
drive, the contents of the MR-8HD/CD hard
disk are shown, in which you can see all the
song folders.
Open the "2 MIX" folder in the desired song
folder, and select the stereo WAV file, then copy
it to the computer.
<Note>:
By default, the disk protect func-
tion is enabled. In this condition, when the
MR-8HD/CD enters the USB mode, “
<DISK
PROTECTED>
” is shown in the USB screen,
as above.
<Note>:
After copying a WAV file in the folder
to a computer, the original file remains. How-
ever, if you execute "
move to another folder
",
the original file on the disk is lost.
<Note>:
To disconnect the MR-8HD/CD from
the personal computer after completing the
data export, make sure that the [
RECORD
]
key indicator is not lit, and follow the pro-
cedure for hardware disconnection of Win-
dows.
8) When the data export completes, disconnect the
MR-8HD/CD from the personal computer.
4) Rotate the [MENU/ENTER] knob to move the
cursor to “USB Device Mode
”, and press the
[MENU/ENTER] knob.
The MR-8HD/CD enters the USB mode and the
display shows the screen as below.
9) Press the [STOP] key to exit the menu mode.
<Note>:
While the MR-8HD/CD is in the USB
mode, all keys except the [
STOP
] key are
ineffective. Pressing the [
STOP
] key exits the
USB mode.