HHB comm DRM85 Microphone User Manual


 
En.38
ENGLISH
Specifications
Sampling Frequency 48kHz, 44.1kHz and 32kHz. Selection by FlashMic Manager or on DRM85.
Bit Resolution (Linear) 16 Bit
Audio Formats Linear PCM or MPEG 1 Layer 2. Selection by FlashMic Manager software or on DRM85.
6 mode settings.
Bit rates (MPEG) 192, 160, 128 kbps
Electronics Frequency 20 Hz - 20 kHz ± 1dB @ 48 kHz FS Linear PCM
Response
THD + N < 0.1% (20 Hz - 20 kHz) @ 48 kHz FS Linear PCM
Number of Channels 1 (Mono)
Microphone Capsule Omni-directional
Record Level Automatic or Manual Gain Control
High Pass Filter Switchable on/off, 12 dB/octave @ 100Hz
Data Storage System Fixed internal memory, capacity 1 GB.
Date / Time Internal real-time clock, running as long as power supply is available. Back-up supply for 1
minute to allow battery change. Set/synchronized by host computer application according to
host computer clock. Manual setting on DRM85 by menu item.
File Format Linear PCM: .wav, Broadcast Wave File (.wav). Or compressed MPEG 1 Layer 2 .wav
Date / Time stamp is stored in file header. Filename generated automatically by DRM85,
basic text string provided from PC software.
File System FAT. Mounts as a removable drive via USB mass storage device protocol. File transfer is
possible with the FlashMic Manager software or through Windows Explorer and Mac OS
Finder.
Headphone Output 3.5mm stereo socket, mono signal to both channels. Manual volume control by rotary switch.
Output may be used for analog audio recording. Drive capability for 32 ohm headphone, short
circuit protection.
Included accessories Stand Clamp, Batteries (x2), USB cable, Pouch, CDROM,
Manual.
Optional Accessories Windshield (DRMWS), table stand (DRMTS).
Weight 366 grams / 13 ounces (excluding batteries).
Dimensions Length 244mm / 9.6 inches. Diameter at widest point (mic capsule) 50mm, 2 inches.