Filter
Top Products
Basic Controls P. 5
44. Sostenuto Pedal
Depressing this pedal after playing the keyboard and before releasing the keys
sustains the sound of only the keys just played. This pedal can also be assigned to
control other functions. (See page 128)
45. Sustain Pedal
Sustains the sound after lifting your hands from the keyboard. The sustain pedal is
capable of responding to half pedaling.
46. Headphone Jacks
These jacks are used to connect up to two headphones to the CP piano.
47. Mic In Volume
This knob adjusts volume level of the microphone input.
48. Microphone Jack
This jack is used to connect a microphone or other comparable mic-level sound
source.
49. EXP Pedal
This jack is used to connect an optional expression pedal.
50. Video Out
This jack is used to connect the CP to a TV set or external monitor display.
51. Line Out Jacks
These jacks are used to provide stereo output of the CP’s sound to amplifiers, tape
recorders or similar equipment. The audio signal coming through the LINE IN jacks
is also routed to these jacks.
52. Line In Jacks
These jacks are used to connect stereo outputs from other audio equipment or
electronic instruments to the CP’s speakers. The audio signal coming through these
jacks bypasses the CP’s volume control.
53. MIDI-USB Switch
Switches between the MIDI jacks and USB jack.
54. MIDI Jacks
These jacks are used to connect external MIDI devices to the CP. Enabled only
when the MIDI-USB switch is set to MIDI.
55. USB Jacks
This jack is used to connect a personal computer to the CP. Enabled only when the
MIDI-USB switch is set to USB.
56. Receptacle for Pedal Cable
This jack is used to connect the cable from the pedal unit.
Rear Terminals
49
50 51
52
53
54 55 56