Filter
Top Products
11
Using the INPUT Jack (NC-500 only)
This jack lets you play an audio device (such as a CD or MD player) or an
electronic instrument through the NC-500’s speakers and headphones,
along with the sound of the NC-500. Use a stereo miniplug to make the
connection.
EM-1
1 2
5
7
10 12
14
16
15131198
4
3
Electronic Instrument
CD player,
MD player, etc.
OUTPUT
NC-500
Using the OUTPUT Jacks
Use these jacks to send the sound to an external sound system or to
recording equipment. Use mono cables with standard (1/4") plugs. Connect
each cable to the corresponding INPUT jack on the external device. When
connecting only one output, use the L/MONO jack only.
Use the volume knob to adjust the level through the OUTPUT jacks.
L/MONO
R
INPUT
Amplified Speakers
Recorder
NC-500/300
When playing through the speakers of an external device, you can turn off
the sound from the piano's speakers by plugging headphones (or any 1/4”
phone connector) into one of the headphone jacks. On the NC-500, you can
also turn off the sound by turning the SPEAKER switch to OFF.
Be sure to turn the power off before making any connections. Connections
made incorrectly may result in damage to (or misoperation) of the piano or
the external device.
Different devices require different types of cables. Please purchase cables
that are appropriate for the external devices you wish to use.
Attaching the Speaker Covers
If you have removed a speaker cover from the main unit or (on the NC-500)
from the stand, you can reattach the cover by placing it into position and
pressing gently at the four locations indicated by the circles below.
Speaker Cover
Main Unit
Stand