Filter
Top Products
12
3-8 Connecting AC Modules (Trunk Cable)
Before connecting AC modules in each array, be aware of the following precautions:
- Insert trunk female connector into trunk male connector in horizontal direction. If you insert at wrong angle, the
connector can be damaged.
- Insert fully into the end of the connector until you hear a click.
- Do not let cable be pulled too tight or hang too loose. Internal conductor may break.
- Do not allow any liquid inside to prevent danger of electric shock.
- Do not use damaged cables.
- Do not cut or transform the dedicated cables for use.
- Frequent disassembly or connection may damage the cable.
- The size of dedicated cables are decided by NEC2014. (For the size, refer to Chapter 6. Product Specification)
- For information about accessory, refer to Chapter 5. Accessory.
Trunk connector insertion
- Avoid all external interference to the connector. Do
not impose force on the side direction of the
connector.
Trunk cable usage and maintenance
- Do not bend the cable more than 10 times. It may
result in mechanical and/or electrical problems.
- Use the dedicated unlocking tool to remove the connector. Do not use any other tools.
Trunk connector removal
Checking Accessory
Unlocking tool
Trunk cable
connector
Drop cable
connector
- For easy cable connection, the trunk male connector is detachable from the back sheet of PV module.