LG Electronics LGENBOX-01 Drums User Manual


 
22
3-11 Operation
3-12 Maintenance
Water, ethanol or a conventional glass cleanser with a micro-fiber cloth can be used for regular washing or rinsing
of the front glass to remove dust, dirt or other deposits.
No aggressive and abrasive cleansers or chemicals such as alkali chemicals including ammonia based solution
should ever be used on the front glass.
• Always wear rubber gloves for electrical insulation while maintaining, washing or cleaning panels.
Deposits of foreign material on the frame surface can be cleaned using a wet sponge or soft cloth and dried in air.
All works related to repair should only be performed by an approved installer for the safety of workers and
systems.
Step 1. Check connection and condition of the AC cable.
Step 2. Turn on the circuit breaker for the solar system.
Step 3. Wait about 10 minutes for the system check of micro inverters.
Step 4. Monitor the operation of the solar system through a smartphone or PC.
To prevent risk of burn, do not touch the metal part of an operating AC module with bare hands.
To prevent the risk of over voltage, do not disconnect the cable connect in operation.
WARNING
After completing installation for the AC module system, operate the AC module in the following
order.