Filter
Top Products
133
Elastic Suspension EA 170 (mt)
The EA 170 is designed for the
TLM 170(R) and M 149 Tube micro-
phones. It has a swivel mount with a
5/8"-27 female thread, plus a thread
adapter to connect to 1/2"- and 3/8"
stands.
EA 170 ................. ni .......... Cat. No. 007271
EA 170 mt ........... blk........ Cat. No. 007273
Table Stands, Table Flange
Table Stand MF2
Small table stand with brass base, very
sturdy. It has a black matte finish. The
bottom is fitted with a non-slip rubber
disk. The stand has a 1/2" threaded stud
for mounting the SG 21/17 mt, for exam-
ple. The rubber shock mount between
the stud and the base serves to sup-
press structure-borne noise.
Ø60 mm, Weight 340 g.
MF 2 ..................... blk ........ Cat. No. 007266
Elastic Suspensions
Elastic Suspension EA 2124 A mt
The EA 2124 A mt is able to accept mi-
crophones from 21 to 24 mm in diame-
ter. It has a swivel mount with a 5/8"-27
female thread, plus a thread adapter to
connect to 1/2"- and 3/8" stands.
EA2124A mt...... blk ........ Cat. No. 008433
MF-AK Table Stand with Swivel Joint
Small table stand with swivel joint, with
2.4m cable, connecting directly to the
active capsules of the KM 100 system. It
is inserted between active capsule and
KM100 output stage. Cable outlets are
sideways and on the underside. The MF-
AK is fitted with a nonslip rubber disk.
Ø60mm, Weight 285g.
MF-AK .................. blk........ Cat. No. 008453
Table Flange TF 221 c
Table flange to mount components of
the KM 100 system inconspicuously. It
can be fastened under a tabletop or ver-
tically to the edge of a stage allowing to
hide other attachments, for example the
SG 100 swivel mount. A KVF.. capsule
extension, when clipped into the SG 100
is the only visible part above the hole in
the table. The table flange comes with a
connecting rubber piece for acoustic de-
coupling of the microphone from the
mounting surface. 1/2" threaded stud.
Flange-Ø 73 mm. 3 mounting holes,
Ø 5.2 mm each.
TF 221 c .............. blk........ Cat. No. 007278
Table Stand MF3
The MF 3 is a table stand with iron base,
1.6 kg in weight, 110 mm in diameter. It
has a black matte finish. The bottom is
fitted with a non-slip rubber disk. The
stand comes with a reversible stud and
an adapter for 1/2" and 3/8" threads.
Stand extensions STV see page 5.
MF 3 ..................... blk ........ Cat. No. 007321