Filter
Top Products
136
Auditorium Hanger MNV 87 (mt)
The auditorium hanger consists of a ca-
ble suspension and a rotating 1/2"
threaded stud, to connect to e. g. swivel
mounts. The stud is screwed into the
threaded coupling of the swivel mount.
Then the microphone can be tilted while
it is suspended from its own cable. Suit-
able for cables with 4–8 mm diameter.
MNV 87 ............... ni .......... Cat. No. 006804
MNV 87 mt .......... blk ........Cat. No. 006806
Auditorium Hanger MNV21 mt
The auditorium hanger adjusts the tilt-
ing angle of a microphone suspended by
its own cable. The MNV 21 consists of
the tilting clamp, suitable to hold a Neu-
mann miniature microphone or KMR 81,
and a locking cable strain relief. Suitable
for cables with 4–5 mm diameter.
MNV 21 mt .......... blk ........Cat. No. 006802
Auditorium Hangers
Stand Mounts and Miscellaneous Mechanical Adapters
Double Mount DS 100-1
Mount to attach two KVF.. capsule ex-
tensions of the KM 100 system onto a
tripod. Especially suited for holding
long KVF.. It is easy to arrange the cap-
sule extensions in parallel or facing each
other. The double mount has a 5/8"-27
female thread, plus a thread adapter to
connect to 1/2"- and 3/8" stands.
DS 100-1 ............. blk ........ Cat. No. 008491
Double Mount DS120
The DS 120 has a 150 mm long support
bar with two movable 1/2" threaded
studs. Two microphones in their mounts
can be attached. Any space or angle be-
tween the microphones is freely adjust-
able. The DS 120 has a 5/8"-27 female
thread, plus a thread adapter to connect
to 1/2"- and 3/8" stands.
DS 120 ................. blk........ Cat. No. 007343
Mounting Bracket H 82
Mounting bracket for secure fixed posi-
tioning of microphones with a diameter
of 21 or 22 mm. The mounting bracket
itself can be attached to the SG 82 swiv-
el mount and the HG 82 handle.
H 82 .....................blk........ Cat. No. 007190
Handle HG82
Handle for work with hand-held micro-
phones. An adjustable bracket allows to
attach the H 82 mounting bracket or the
EA82/EA30B elastic suspension, with
or without windscreen. The handle has a
3/8" thread to connect ot stands.
HG 82 ................... blk ........ Cat. No. 006856
Auditorium Hanger MNV 100
The MNV 100 auditorium hanger is used
to suspend a detached miniature micro-
phone capsule freely from its intercon-
necting cable. The assembly can be ro-
tated and tilted to any desired angle.
Suitable for cables with 3–3.5 mm diam-
eter.
MNV 100 ............. blk........ Cat. No. 006811