Filter
Top Products
20
Word clock input: BNC, 75 ohms.
Word clock output: BNC, 75 ohms, automatically set to the internal
word clock master when no external word clock received.
Selectable internal sampling rates: 44.1, 48, 88.2, 96, 176.4,
192 kHz.
External Word clock: 44.1, 48, 88.2, 96, 176.4, 192 kHz
or AES 11 format.
Indicators: Data Valid (AES 42) and Sync Locked (Mode 2) for each
channel, Power On and Ext. Word Clock.
Power supply: 90-240 V, 50/60 Hz.
Storage of the last microphone settings and reloading to the
microphones after power on automatically without the need of the
computer/RCS.
Features of the RCS (Remote Control SoftwareFeatures of the RCS (Remote Control Software
Features of the RCS (Remote Control SoftwareFeatures of the RCS (Remote Control Software
Features of the RCS (Remote Control Software
))
))
)
Communication via USB port (Win 2000/98SE/ME/XP, Vista,
MAC OS version 8.6...10 on PowerPC)
Up to 8 channels displayed simultaneously on the screen
Controllable functions: polar pattern, low-cut, pre-attenuation,
gain, test signals, limiter/compressor/de-esser, peak limiter, phase
reverse, mute, sampling rate, synchronization mode, signal lights,…
Display: peak level meter, gain reduction meter for compressor/
limiter/de-esser and peak limiter, microphone properties
(manufacturer, model, serial number, hardware and software
revision, internal latency time), DMI properties, status signals
(overload, limiter active, data valid, sync locked, power on)
Saving/Loading of configurations
Individual channel labelling
Software update of Neumann microphones and DMI device
Connection Kit S/PDIF (AES/EBU) SpecificationsConnection Kit S/PDIF (AES/EBU) Specifications
Connection Kit S/PDIF (AES/EBU) SpecificationsConnection Kit S/PDIF (AES/EBU) Specifications
Connection Kit S/PDIF (AES/EBU) Specifications
Connector: input XLR3F, output Cinch (XLR3M)
Weight: approx. 96 g (S/PDIF), approx. 130 g (AES/EBU)
Width: 32 mm, Height: 26 mm, Length: 105 mm
Power supply: 90-240 V, 50/60 Hz
For remote controlling functions you have to use the DMI-2
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1)
at 1kHz
2)
re 94dBSPL
3)
according to IEC60268-1;
CCIR-weighting according to CCIR468-3, quasi peak;
A-weighting according to IEC 61672-1,RMS
4)
D-01 only