Filter
Top Products
22
Selecting and Playing Sounds
■ Selecting a Voice Using the Upper Orchestral
[Others] Button
Notice that there is an Upper Orchestral [Others] button. By using the Upper
Orchestral [Others] button, you can select all voices.
1. Press the Upper Orchestral [Others] button.
The voice name appears in the display.
fig.02-10 (P.29)
The indicator of the Upper Orchestral [Others] button will light.
2. Press the [Alternate] button and select the voices to assign,
either with the [Alternate] button ON (lit) or OFF (unlit).
3. While the voice name is shown in the display screen, use the
Value [-] [+] buttons to select the desired voice.
The indicator of the Upper Orchestral [Others] button will blink.
To stop mid-way through this or any procedure, press the [Display/Exit]
button.
4. Once again, press the Upper Orchestral [Others] button to
confirm the voice.
The indicator of the Upper Orchestral [Others] button will change from
blinking to lit.
You can jump by voice
group by pressing the
Menu [ ] [ ] buttons
to select the voice group.
The sound number of each
voice is preceded by an
alphabetical character A–T
which indicates the sound
group; e.g., “G15 Strings5.”
You can establish the voice
b
y playing in the
keyboard’s Upper part.
About the voices that can
b
e assigned to an Upper
Orchestral [Others] button,
refer to the Leaflet of AT-5
specifications.