Filter
Top Products
71
Display Messages
fig.E.30
Meanings:
• The performance data is excessively large, and cannot
be loaded.
• Since the internal memory is full, recording is not
possible.
fig.E.40
Meanings:
• The AT-5 cannot deal with the excessive MIDI data sent
from the external MIDI device. Reduce the amount of
MIDI data sent to the AT-5.
fig.E.41
Meanings:
•A MIDI cable has been disconnected. Connect it
properly and securely.
fig.E.51
Meanings:
• There is something wrong with the system. Repeat the
procedure from the beginning.
fig.ot-02
Meanings:
• The AT-5 is warning you that its memory will soon
become full to capacity, so not much more recording can
be done.
fig.ot-03
Meanings:
• To carry out the procedure, you first need to erase perfor-
mance data in the AT-5. This message asks you to confirm
that you don’t mind doing this.
To erase the data, press the [Rec] button. When you do not
want to erase it, press the [Reset] button then save the data
on floppy disk.
fig.ot-05
Meanings:
• There already is performance data having the same name
on the floppy disk.
To replace the existing data with the new version, press
the [Rec] button. To save it as a separate new file, press the
[Reset] button first. Then, after changing the name, save it
on floppy disk.