65
Various Other Settings
Adjust the Standard Pitch
(Master Tune)
The basic pitch of an instrument is generally considered as
the pitch of the middle A note. The “Master Tune” parameter
lets you adjust this basic pitch to match the pitch of any other
instruments that are playing together with the AT-5.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Master Tune.”
3. Press the Value [-] and [+] buttons to adjust the
basic pitch.
Settings 415.3Hz – 466.2Hz (0.1 Hz units)
To return to the basic screen, press the [Utility] button.
➔ By pressing the Value [+] and [-] buttons simultaneously, you
can restore the default setting (440.0 Hz).
➔ This setting remains stored in memory even while power is
turned off.
Selecting the MIDI Transmit
Channel (Tx MIDI Channel)
You can use the MIDI connectors of the AT-5 to transmit
musical data to external devices. This setting determines
which channel is used to transmit the MIDI messages that
provide detailed information about what is being played on
the keyboard.
➔ For details refer to “If You’re Using MIDI” (p. 67).
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“MIDI.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“TxMIDI Channel.”
5. Press the Menu [ ] and [ ] buttons to select a
part.
Part Upper, Lower, Control
6. Press the Value [-] and [+] buttons to select the
MIDI transmission channel.
Channel 1-16
To return to the basic screen, press the [Utility] button.
* The CONTROL part transmits expression pedal data.
