Filter
Top Products
62
Adjusting the Effects
Sustain Effect
Sustain allows you to add a decay to each voice after the keys
are released.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Sustain.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Sustain.”
5. Press the Menu [ ] and [ ] buttons to select
the keyboard register to which the sustain effect
is to be applied.
Register Upper, Lower
6. Press the Value [-] and [+] buttons to adjust the
setting.
To return to the basic screen, press the [Utility] button.
Changing the Sustain Length
You can change the length of the sustain in each register.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Sustain.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Sustain Length.”
fig.11-06
5. Press the Menu [ ] and [ ] buttons to select
the keyboard register whose sustain length you
wish to adjust.
Register Upper, Lower
6. Press the Value [-] and [+] buttons to adjust the
setting.
Settings SHORT, MIDDLE, LONG
To return to the basic screen, press the [Utility] button.
Setting Descriptions
ON The Sustain effect is applied to the voices
OFF The Sustain effect is not applied to the voices