Filter
Top Products
63
Various Other Settings
Turning Initial Touch On/Off
(Initial Touch)
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of
volume. It can be switched ON/OFF independently for the
Upper and Lower registers.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Initial Touch.”
fig.12-03
3. Press the Menu [ ] and [ ] buttons to select
“Initial Touch Upper,” or “Initial Touch Lower.”
Register Upper, Lower
4. Press the Value [-] and [+] buttons to switch the
Initial Touch “ON” or “OFF.”
To return to the basic screen, press the [Utility] button.
➔ This setting remains stored in memory even while the power is
turned off.
Changing the Function of the
Foot Switch (Left Foot Sw,
Right Foot Sw)
On each side of the expression pedal is a foot switch, and a
function is assigned to each switch.
You can select any of the following functions and assign
them to Foot Switch.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Left Foot Sw” or “Right Foot Sw.”
ig.12-09
ig.12-09
3. Press the Value [-] and [+] buttons to set the
function to be assigned to the foot switch.
To return to the basic screen, press the [Utility] button.
Setting Descriptions
ON
The harder you play the key, the higher the
volume. Some voices switches the sound
depending on the strength with which you
play the keyboard.
OFF
Volume remains constant regardless of how
hard you play. The way the sounds are
played also remains unchanged.
Setting Descriptions
ROTARY FAST/
SLOW
Switch the Rotary speed between
“FAST” and “SLOW.”
GLIDE
While the Foot Switch is pressed,
the pitch will temporarily be
lowered, and will gradually return
to normal when you release the
Foot Switch.
DAMPER OF
UPPER
Notes played on the Upper part of
the keyboard will be sustained only
while you continue pressing the
Foot Switch.